Thermoplastic Paint Melters

Self-propelled Thermoplastic Applicators

Operator Propelled Thermoplastic Applicators

Operator Propelled Thermoplastic Applicator for Zebra Crossing

Operator Propelled Primer Sprayers

ZSF800 Automatic Standing Normal Paint Line-marking Machine

ZST100-I Automatic Hand-hold Normal paint Line-marking Machine

ZST100-II Automatic sitting Normal Paint Line-marking Machine

ST100 Operator Propelled Paint Striper

ST200 Operator Propelled Paint Striper

ST300 Operator Propelled Paint Striper

QC-I Alloy Knife Type Waste Line Sweeper

QC-III MILLING-PLANING TYPE REMOVAL MACHINE

ST300 Operator Propelled Paint Striper

1. Engine: 5.5 HP  or Honda 6.5HP deceleration gasoline engine.
2. Paint pump:High pressure airless diaphragm pump. Max pressure: 20mpa (work pressure: 10-15 Mpa ), max flow: 8.5L/min.
3. Spray gun: Manual single  spray gun with reversible striping tip (20/25), easy use and repair. One 6m leng hose is used for special application, such as spray out arrow-head, letter, zebra crossing, etc.
4. Spray width: 100-200mm.
5.  Chassis: Steel welding frame, surface chrome-plated or coated heat-resistant coating, with manual brake device provides convenienct stop on the ramp.
6. Rubber wheel: Left-back ,right-back wheels: ф350mm; rear wheel: ф190mm.
7. Front wheel directional device: Brake handle controlled lockable directional device ensures the machine freely operated in straight or curve.
8. Guide rod: Freely adjustable to up, down, left, right.
9. Paint Tank: With filter at inlet.
10. Dimension: 1360mm(L) x 900mm(W) x 1050mm(H).
11. Weight : 135kg.